VIR GENERATOR UNIT
U8794
instead of sensor output
|
Key Features
âĒ As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance âĒ DC voltage, DC current, and resistance simulation output âĒ In resistance generation, the voltage to be connected is measured, the output current is calculated from the set resistance value, and simulated output âĒ Used in combination with Memory HiCorder series MR8740T (not available in other models) âĒ Isolation between each output channel and between channel and chassis |
Model No. (Order Code)
Note: This module must be used with the Memory HiCorder. Output cords are not included. Please purchase them separately.   |
Basic specifications (Accuracy guaranteed for 1 year)
| Output terminal | Number of channels: 8 (each channel is isolated), Connector: 25-pin D-sub Max. rated voltage to earth: 25 V |
|---|---|
| Output items | DC voltage, DC current, resistance (simulated output) |
| Output range | DC voltage: -0.100 0 V to +5.300 0 V (setting resolution: 0.1 mV) DC current: 5 mA range: -5.000 0 mA to +5.000 0 mA, Setting resolution: 0.1 ΞA 1 mA range: -1.000 00 mA to +1.000 00 mA, Setting resolution: 0.01 ΞA 250 ΞA range: -250. 00 ΞA to +250.00 ΞA, Setting resolution: 0.01 ΞA 50 ΞA range: -50. 000 ΞA to +50. 000 ΞA, Setting resolution: 0.001 ΞA Resistance: 10 ÎĐ to 1 MÎĐ, Setting resolution: 6 digits |
| Output accuracy | DC voltage: 5 V range, ¹0.035% of setting ¹ 800 ΞV DC current: 5 mA range: ¹0.050% of setting ¹ 4.0 ΞA 1 mA range: ¹0.050% of setting ¹ 800 nA 250 ΞA range: ¹0.050% of setting ¹ 200 nA 50 ΞA range: ¹0.050% of setting ¹ 40 nA |
| Other | Self diagnostic, switch output terminals, estimate target connection, cancel offset |
| Dimensions and mass | 106 mm (4.17 in) W Ã 19.8 mm (0.78 in) H Ã 196.5 mm (7.74 in) D, 280 g (9.9 oz) |
| Accessories | None |
For more information, click here
