LOGIC PROBE
9327
with Memory HiCorders at High-speeds
|
âĒ Detect Hi/Lo voltage or relay contact signals
âĒ 4 channels with common ground âĒ Switch between digital or contact input âĒ 3 thresholds for digital input (+1.4/+2.5/+4.0V) âĒ Supports pulse widths as narrow as 100ns using high speed response âĒ Miniature connector |
Model No. (Order Code)
Connects to the logic input terminals of Hioki Memory HiCorders. Check the size of the terminal before purchase.   |
Basic specifications
Note: The unit-side plug is miniature terminal type
| Function | Detection of voltage signal or relay contact signal for High/Low state recording |
|---|---|
| Input | 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detect open-collector signals) Input resistance: 1 MÎĐ (with digital input, 0 to +5 V) 500 kÎĐ or more (with digital input, +5 to +50V) Pull-up resistance: 2 kÎĐ (contact input: internally pulled up to +5 V) |
| Digital input threshold | 1.4V/ 2.5V/ 4.0V |
| Contact input detection resistance | 1.4 V: 1.5 kÎĐ or higher (open) and 500 ÎĐ or lower (short) 2.5 V: 3.5 kÎĐ or higher (open) and 1.5 kÎĐ or lower (short) 4.0 V: 25 kÎĐ or higher (open) and 8 kÎĐ or lower (short) |
| Detectable pulse width | 100 ns or longer |
| Max. allowable input | 0 to +50V DC (the maximum voltage that can be applied across input pins without damage) |
| Dimensions and mass | 62 mm (2.44 in)W Ã 94 mm (3.70 in)H Ã 20 mm (0.79 in)D, 150 g (5.3 oz), Main unit cable 1.5 m (4.92 ft), input section cable 300 mm (0.98 ft) |
| Accessories | IC clip leads Ã1, Alligator clip leads Ã1, Carrying case Ã1, Instruction Manual Ã1 |
For more information, click here
