LOGIC PROBE
9320-01
with Memory HiCorders
|
âĒ 4 input channels (Not isolated)
âĒ For ON/OFF detection of voltage/contact signals âĒ Select from 3 steps of input thresholds âĒ Response pulse width of 500 ns or more âĒ Compatible with Memory HiCorders featuring a miniature terminal |
Model No. (Order Code)
Note: Verify that your Memory HiCorder features a miniature connection terminal before purchase   |
Basic specifications
Note: The unit-side plug of the 9320-01 is different from the 9320
| Function | Detection of voltage signal or relay contact signal for High/Low state recording |
|---|---|
| Input | 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detect open-collector signals) Input resistance: 1 MÎĐ (with digital input, 0 to +5 V) 500 kÎĐ or more (with digital input, +5 to +50V) Pull-up resistance: 2 kÎĐ (contact input: internally pulled up to +5 V) |
| Digital input threshold | 1.4V/ 2.5V/ 4.0V |
| Contact input detection resistance | 1.4 V: 1.5 kÎĐ or higher (open) and 500 ÎĐ or lower (short) 2.5 V: 3.5 kÎĐ or higher (open) and 1.5 kÎĐ or lower (short) 4.0 V: 25 kÎĐ or higher (open) and 8 kÎĐ or lower (short) |
| Detectable pulse width | 500 ns or longer |
| Max. allowable input | 0 to +50V DC (the maximum voltage that can be applied across input pins without damage) |
| Dimensions and mass | 62 mm (2.44 in)W Ã 94 mm (3.70 in)H Ã 20 mm (0.79 in)D, 150 g (5.3 oz), Main unit cable 1.5 m (4.92 ft), input section cable 300 mm (0.98 ft) |
| Accessories | IC clip leads Ã1, Alligator clip leads Ã1, Carrying case Ã1, Instruction Manual Ã1 |
For more information, click here
