CLAMP ON SENSOR
9694

For measuring load current, voltage output sensor
5 A AC
Exclusive Academic Offer

Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-02 is a 50A AC clamp sensor with voltage output for measuring load current.

CAT III 300V

Key Features
• For inverter devices or commercial power lines
• For measuring the secondary side of 5A CTs
• Fits in narrow spaces due to compact design

Model No. (Order Code)

9694 For the PW3198 and similar products

Note: Supports power quality analyzers, power meters and other data acquisition equipment with voltage input

CE

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Rated measurement current 5 A AC
Max. measurement current Continuous 50 A (45 to 66 Hz)
Output rate 10 mV AC/ A
Amplitude accuracy (45 to 66 Hz) ±0.3 % rdg. ±0.02 % f.s.
Phase accuracy ±2° (45 Hz to 5 kHz)
Amplitude frequency characteristics Within ±1% at 40 Hz – 5 kHz (deviation from amplitude accuracy)
Max. rated voltage to earth 300 V AC rms or less
Measurable conductor diameter φ 15 mm (0.59 in) or less
Operating temperature and humidity 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
Dustproofness and waterproofness N/A
Dimensions and mass 46 mm (1.81 in)W × 135 mm (5.31 in)H × 21 mm (0.83 in)D, 230 g (8.1 oz)
Cord length 3 m (9.84 ft), Output terminal: BNC

 

For more information, click here