Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7736 is a 600 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 for convenient field testing, while delivering an extended temperature range and auto-zero adjustment to minimize drift due to wide temperature changes that occur during long-term testing.
Further extend the functionality of this system by connecting the Display Unit with a Hioki memory recorder or logger.
CAT IV 600 V
Model No. (Order Code)
Note: CT7700 series cannot be used alone. Use with the Display Unit CM7290, CM7291 to connect with Data Loggers and Memory HiCorders. When used in combination with CM7290 or CM7291, the frequency band of current display and waveform output becomes narrow.
Connect to Recorders, Data loggers, and Oscilloscopes
Must be paired with the Display Unit CM7290 or CM7291 to operate as a standalone unit. Add an output cord to deliver signals to a data logger or Memory HiCorder for the following types of output:
• A DC or AC (up to 5 kHz/10 kHz) current waveform as-is (using WAVE mode for waveform output)
Basic specifications (Accuracy guaranteed for 3 years, Post-adjustment accuracy guaranteed for 3 years)
|Rated measurement current||600 A AC/DC|
|Max. measurement current||600 A
(requires derating at frequency)
|Max. allowable peak input||900 A peak|
|Bandwidth||DC to 5 kHz (-3dB)
(When used in combination with CM7290 or CM7291: DC 3 Hz to 1 kHz)
|Typical accuracy||±1.8 deg. (DC < f ≤ 66 Hz)|
|Output rate||1 mV/A|
|Max. rated voltage to earth||AC/DC 600 V (CAT IV)
AC/DC 1000 V (CAT III)
|Core diameter||φ 33 mm (1.30 in) or less|
|Output connectors||HIOKI PL 14|
|Operating temperature range||-25 °C to 65 °C (-13 °F to 149 °F)|
|Dimensions and mass||64 mm (2.52 in)W × 160 mm (6.30 in)H × 34 mm (1.34 in)D, 320 g (11.3 oz), Cable length 2.5 m (8.20 ft)|