FLYING PROBE TESTER
FA1817

Detect Latent Failures in High Density Substrates
Without Fail

The FA1817 is a fixtureless, dual-sided, bare board tester that provides superior cost performance and quick inspection yield thanks to advanced probe movement technology. Using a total of four arms, two in front and two in back, it is capable of simultaneously testing both sides of the board, provides open via detection via low resistance testing.

Key Features
• Optimization of probe movement reduces inspection time by up to 20%
• Reduce probe marks in combination with the latest probes
• Fault analysis using newly developed “Process Analyzer”

Model No. (Order Code)

FA1817 Vertical, 2-sided

Installation area: FA1817 can inspect boards (610 × 510 mm) of the same size as the conventional Model 1271, but the installation area for the equipment is even smaller than the conventional Model 1270 (inspection board size is smaller than on the 1271), contributing to space saving measures. In addition, a back door is available as an option, supporting easier maintenance.

Specifications Overview

Number of arms 4 (top surface × 2, bottom surface × 2)
Mountable probes 1172 series, CP1072 series
Number of test steps 999,999 steps
Measurement parameters and measurement ranges Resistance : 40.00 μΩ to 40.00 MΩ
Insulation resistance : 1.000 kΩ to 100.0 GΩ
Capacitance : 100.0 fF to 10.00 μF
Leak current measurement : 1.000 μA to 10.00 mA
High voltage resistance : 1.000 kΩ to 100.0 GΩ
Capacitance insulation resistance : 1.000 kΩ to 10.00 MΩ
Open test : 4.000 Ω to 4.000 MΩ
Short test : 400.0 mΩ to 40.00 kΩ
Judgment range -99.9% to +999.9% or absolute value
Overall probing precision 25 μm (Square), (Note: Restrictions on inspection conditions)
Probing pitch 80 μm (When using CP1072-01 probe, between L-R arm)
Measurement time Max. 67 points/ s (X-Y movements of 0.15 mm, 4-arm simultaneous probing, when capacitance measurement)
Testable board size Standard specification: 50 mm (1.97 in) W × 50 mm (1.97 in) H to 610 mm (24.02 in) W × 510 mm (20.08 in) H, Thickness 1.0 mm (0.04 in) to 3.2 mm (0.13 in)
Fixed air type board (option): 50 mm (1.97 in) W × 70 mm (2.76 in) H to 610 mm (24.02 in) W × 510 mm (20.08 in) H, Thickness: 0.6 mm (0.02 in) to 6.0 mm (0.24 in)
Maximum testable area 604 mm (23.78 in) W × 504 mm (19.84 in) H
Board clamping Board 2-side chuck method (with tension function)
Power supply 200 V, 220 V, 230 V, 240 V AC single phase (specify upon order), 50/60 Hz, Maximum power consumption: 3 kVA
Dimensions and mass 1500 mm (59.06 in) W × 1950 mm (76.77 in) H × 800 mm (31.50 in) D, (Excluding protruding parts), 1070 kg (37742.5 oz)

 

Preview Catalog: FLYING PROBE TESTER FA1817 Download PDF  [1MB] English

For more information, click here