FLYING PROBE TESTER
FA1240-6x

Electrical Testing Verifies Correct Mounting
Populated Board Testing System

Hioki PCB and substrate inspection equipment leverages our core competency in high precision component testing. The FA1240 series is a 4-arm populated board inspection tool that delivers multi-functional testing in as fast as 0.025 sec./step.

CE Compliant model: FA1241-61

คุณลักษณะเฉพาะ
    • Quickly complete programs that take into account component height
    • Automatically calculate arm interference (when used with the UA1780)
    • Designed to improve probe replaceability, dramatically reducing system downtime caused by probe replacement
    • High-speed testing at up to 0.025 sec./step
    • Proprietary Hioki lead float detection reliably detects issues up to and including pseudo-contact
    • Provides a superior level of solder quality assurance
    • Phase-isolated measurement and guarding functionality are ideal for analog circuits
    • Support for active testing (optional feature)
    • Large testing area of 510 × 460 mm (FA1240-61)
    • Automatic alignment function and simple visual test function

Model No. (Order Code)

FA1240-61 For large boards
FA1240-63 For medium rack boards
FA1241-61 CE compliant model, for large boards

High accuracy and automated welding quality assurance solution for battery module

Completely independent 4-Arm movement.
Very easy to change probing point.
Never mind even though different terminal layout mixing.
Test two cells in parallel.


Electrical Testing Verifies Correct Mounting

Create a program from the design data, perform electrical testing with minimal time and cost, and quickly confirm and record defects.


Lead float and pseudo-contact are not the same thing.

Pseudo-contact of leads is a type of defect that may slip through various tests during the board manufacturing process and make its way into the market.

Lead float can be fairly reliably identified by today’s image inspection technology.Consequently, Hioki’s proprietary resistance measurement pseudo-contact test serves to detect pseudo-contact, which is difficult to identify based on appearance alone.


Focusing on the supreme importance of test points and Gerber data

It’s half true, and half untrue, to say that the ability to easily create data is distinct from the ability to easily test boards.Being able to create data easily may have meant being able to test boards easily during the discrete era, but in creating the test data required by the FA1240, it is critical that creating accurate test data be a simple and easy-to-perform process. By minimizing the difference between data that’s good enough to operate the tester and data that’s good enough to ship products, it is possible to minimize production line downtime (to allow for debugging and other modifications) and to ship products with peace of mind.


Simply follow the workflow.

Quickly complete programs that take into account component height


Automatic calculation of arm interference (when used with the UA1780)

Do you check data by looking at probe tips and asking yourself whether they’ll strike components on the board or not?

In fact, choosing probes used to be a demanding and time-consuming part of the debugging process that required a high degree of care.By adding component height information to mounting data, the FA1240 is able to automatically select an appropriate test probe, allowing you to approach the task of debugging electrical testing with peace of mind.


Long-life probes (easy replacement NEW and long service life)

The tips of Hioki’s new super-hard probes show no wear, even after 3 million contact cycles.
Stable contact for up to 3,000,000 uses, prevents pseudo-contact due to slips


ข้อมูลจำเพาะ

FA1240-61
FA1241-61
FA1240-63
Number of arms 4 (L, ML, MR, R)
Number of test steps 40,000 (max.)
Measurement ranges Resistance: 400 μΩ to 40 MΩ
Capacitance: 1 pF to 400 mF
Inductance: 1 μH to 100 H
Diode VZ measurement: 0 to 25 V
Zener diode VZ measurement: 0 to 25 V, 25 to 80 V (optional feature)
Digital transistors: 0 to 25 V
Photo couplers: 0 to 25 V
Short: 0.4 Ω to 400 kΩ
Open: 4 Ω to 40 MΩ
DC voltage measurement: 0 to 25 V
Measurement time Max. 0.025 sec./step Max. 0.025 sec./step
Probing precision Within ±100 μm for each arm (X and Y directions)
Positioning repeatability Within ±50 μm (probing positions)
Inter-probe pitch Min. 0.15 mm
Min. 0.5 mm (when using 4-terminal probes)
Min. 0.15 mm
Min. 0.5 mm (when using 4-terminal probes)
Testable board dimensions 510 mm (20.08 in) W × 460 mm (18.11 in) D 400 mm (15.75 in) W × 330 mm (12.99 in) D
Power supply 200 V AC (single-phase), 50/60 Hz, 6 kVA (FA1241: 230 V AC) 200 V AC (single-phase), 50/60 Hz,
5 kVA
Dimensions and mass 1406 mm (55.35 in) H × 1300 mm (51.18 in) H × 1380 mm (54.33 in) D, 1150 kg (40,564.4 oz) 1266 mm (49.84 in) H × 1369 mm (53.90 in) H × 1425 mm (56.10 in) D, 1050 kg (37,037 oz)

แค็ตตาล็อก

แค็ตตาล็อก: FIT-LINE INSPECTION DATA CREATION SYSTEM UA1780 Download PDF  [1MB] ภาษาอังกฤษ (English)
แค็ตตาล็อก: Contact Probe series CP series, 1161 / 1171 / 1172 series Download PDF  [ุ6MB] ภาษาอังกฤษ (English)
แค็ตตาล็อก: Populated Board Electrical Testing System  Download PDF  [ุ6MB] ภาษาอังกฤษ (English)
แค็ตตาล็อก: FLYING PROBE TESTER FA1240 Download PDF  [ุ6MB] ภาษาอังกฤษ (English)

อุปกรณ์เสริม

FAIL VISUALIZER UA1782

Robust Support for Repair Work Using Simple Operations and Assistive Functionality

FIT-LINE INSPECTION DATA CREATION SYSTEM UA1780

Data Creation Software for Populated Board Testing